Custom Engeneering PLUS II Bedienungsanleitung PDF herunterladen (Seite 21)

1.4 CONNECTIONS OF PLUS II-C AND PLUS II-P

1.4.1 Power supply

The printer is equipped with a 4 pin JST male connector (90°) for the power supply. The signals on the con-

nector pins are as follows:

Model no. type:

Header: S4B-PH-K-S 90° (JST)

Housing: PHR-4 (JST) or equivalent

PIN SIGNAL DESCRIPTION

1 GND Ground signal

2 GND Ground signal

3 +Vin* Head voltage

4 +Vcc* Logic supply voltage

NOTE

(*) For the electrical speciﬁ cations see Chapter 3.

WARNING

Respect the polarity of the power supply.

(Fig.1.7)

1. INSTALLATION AND USE

User Manual PLUS II 1-7

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 63 64

Keine Kommentare

Custom Engeneering PLUS II Bedienungsanleitung Seite 21